Please choose GSM network-based Micro-SIM card (same as Iphone4) for the product. And please note :
a. Please be sure the tracker is turned off before inserting or take out the Micro-SIM.
b. Please be sure the GPRS data plan and Caller id has been activated.
Power on /off :
1. Please insert the Micro-SIM card into the card slot as directed.
2. Press the POWER key for 3-5sec, then the tracker will light on.Blue and Red
3. In the state of power-on ,press power button 3 times, the front of blue and red lights lit simultaneously for about 10sec , then power off at the same time ,the success of the shutdown.
Indicator light show:
1. GPS indicator and GSM indicator:
Function:GPS indicator,GSM indicator
Slow flash:GPS searching,GSM searching
Fast flash:GPS success,GSM success
Close:GPS sleeping,GSM sleeping
2. The smart rolling LED light with four tri-colors : when the environment gets dark, open LED flash automatically, easier to see about the activity status of wearer.
APP banding and function setting:
1. Scan the user manual cover QR code to install the APP.
2. Enter the 10 figures ID number on the tags behind the device.The default password is 123456,click log in,and enter into App
Real -time tracking:Show the latest location of the device, click update location information to see the
1.About the device : Check and edit information of the device.
2. Change password:Amend log in password of the website platform and App.
3. Interval for uploading GPS location : Adjust the time interval of GPS uploading location.Shorter time interval with shorter standby time, more accuracy location.We suggest once 10 minutes uploading location.If you are tracking targets,adjust 30sec to upload location,when you find target,
then turn back 10 minutes or 1 hour to keep longer standby time.
4.Main monitoring number : The master number,to send command and receive alarm.
5.The white list and phone book : Only the phone numbers of white list or phone book can call the phone number of the device and monitoring .
6.Sensor lights : When the environment gets dark, open LED flash automatically, easier to see about the activity status of wearer.
7.Remote power-off:Through App to power off device.
8.Time zones:The factory default is UTC+08:00; users can set it according to local time zone.
Ø Safe zones:Set 2 WiFi safe zones,when wearer leave safe WiFi zones,the website platform will send alert to App.
Ø Device message:List shows alert information of device.
Ø Alarm setting:Get the remind via APP when alarm.
Ø Log out : Log out the APP, and never get the alarm remind via APP.
Please log on www.gps123.org to learn more details of APP and platform.All functions also can set by SMS command.
All command use in lowercase letters, without any blank
space and ending by #.
Command for setting master number :
For example : pw,123456,center,180********#
The tracker will reply : 180******** has been set for the
u The tracker will boot automatically when it is charging. put the tracker in network signal better position when use.
u The new machines need to be recharged for 2 hours before use in order to achieve the best results, please use our distribute charger avoid damage to the host.
Standby time : Upload location date every 10 minutes ,the standby time is 80 hours ,talking time is u 4 hours (Actual test);2)Turn off APP and web platform function, the standby time is about 10 days. Note: Above test data is under the status of strong GSM network.
u After you insert the SIM card and charge the device,please put bake the rubber plug into hole to make sure the waterproof effect.
u This product is waterproof IP67, but still not suitable for soaking in the water or wear to swimming.
u Please do not open the case ,it will damage the waterproof function and loss the warranty rights.
Q: After inserting a SIM card, it can get SMS command, but it display“logoff”on the platform and APP.
A: Please check that SIM Card has GPRS data plan.
Q: After set white list,can not monitoring.
A: Please make sure the SIM card of the device has opened caller ID.
Q: Device show online, but it shows“wait for the device responses”when you set instruction with APP.
A: a. Device signal is not good, so not smooth result of GPRS; b. Device is busy.
Q: The SIM card has GPRS data plan, but the
device still show“logoff“.
A: The tracker have pre-program all most APN, maybe the APN of the SIM card you use don’t preset in the tracker,Please set master number first and then send command to add you APN into the tracker.
The command is: apn,<apn>#
|Buyer||Real customer reviews|
4 Oct 2018 11:19
13 Aug 2018 13:31
20 May 2018 08:07
Отлично. Заработало сразу.
Leave a Review